2018 Hyundai Construction Equipment HX130LCR

MoreLess
Limited Time Offer!

Selling Price -$140,000.00

2018 Hyundai HX130LCRD with dozer blade 3,293 hours, equipped with Engcon tilt rotator, grab cassette, and two buckets, unit has new track chains and sprockets
  • 2018
  • Hyundai Construction Equipment
  • HX130LCR
  • Base
  • Crawler
  • Perkins 854F
  • 4 cycle Diesel, direct injection, turbocharged charger and air cooled.
  • Water
  • 4-cylinders in line
  • Rated fl ywheel J1995 (gross): 73.6 HP (55 kW) / 2,200 rpm | Rated fl ywhee J1349 (net): 71 HP (53 kW) / 2,200 rpm
  • Max: 71 HP (53 kW) / 2,200 rpm
  • 3,400 cc (207 in3)
  • Drive method: Fully hydrostatic type | Drive motor: Axial piston motor, in-shoe design | Reduction system: Planetary reduction gear
  • Multi wet disc
  • Swing brake: Multi wet disc
  • 2 x 12 V x 100 Ah
  • motor: 24 V - 4.5 kW
  • 24 V - 65 Amp
  • Max. travel speed (high / low) 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph) | Swing speed: 12.6 rpm
  • Max: 2 x 126 l/min (33.3 US gpm)
  • Variable displacement tandem axis piston pumps | Sub-pump for pilot circuit: Gear pump
  • Triple grouser 600 (24”): 0.37 kgf/cm2 (5.26 psi) / 0.39 kgf/cm2 (5.54 psi) | Triple grouser 700 (28”): 0.32 kgf/cm2 (4.55 psi) / 0.34 kgf/cm2 (4.83 psi)
  • Gradeability: 35° (70%)
  • Boom: 2-95 mm (3.74") | Arm: 1-100 mm (4.3") | Bucket: 1-100 mm (3.9") | Blade: 2-100 mm (3.9")
  • Boom: 1,015 mm (40") | Arm: 1,070 mm (42.1") | Bucket: 855 mm (33.7") | Blade: 240 mm (9.4")
  • 600 (24”) / 700 (28”)
  • Implement circuits: 330 kgf/cm2 (4,690 psi) | Travel: 330 kgf/cm2 (4,690 psi) | Power boost (boom, arm, bucket): 360 kgf/cm2 (5,120 psi) | Swing circuit: 285 kgf/cm2 (4,050 psi) | Pilot circuit: 40 kgf/cm2 (570 psi)
  • Max. pull: 1,400 kgf (25,100 lbf)
  • 240 liter (63.4 US gal)
  • 8.0 liter (2.1 US gal)
  • (each): 2.3 liter (0.6 US gal)
  • system (including tank): 160 liter (42.3 US gal) | tank: 96 liter (25.4 US gal)
  • DEF/AdBlue® tank: 19 liter (5.0 US gal)
  • Service valve: Installed | Pilot control: Two joysticks with one safety lever (LH): Swing and arm (RH): Boom and bucket (ISO) | Traveling and steering: Two levers with pedals | Engine throttle: Electric, dial type | Swing motor: Fixed displacement axial piston motor Swing reduction: Planetary gear reduction Swing bearing lubrication: Grease-bathed | Center frame: X - leg type | Track frame: Pentagonal box type | No. of shoes on each side: 43 EA | No. of carrier roller on each side: 1 EA | No. of track roller on each side: 6 EA | No. of rail guard on each side: 1 EA
  • Triple grouser 600 (24”): 13,495 kg (29,750 lb) / 14,195 kg (31,290 lb) | Triple grouser 700 (28”): 13,655 kg (30,100 lb) / 14,355 kg (31,650 lb)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $140,000.00
  • Concord
  • Pre-Owned
  • E024887
  • 2018
  • Hyundai Construction Equipment
  • HX130LCR
  • HHKHK305HJ0000113
  • Available
  • 600 (24”) / 700 (28”)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.