Back

2022 Hyundai Construction Equipment Crawler Excavators HX140A L

MoreLess
Limited Time Offer!

Selling Price -$171,000.00
No Images Available

Selling Price -

$171,000.00

HD Certified Pre-Owned
2022 HYUNDAI HX140ALD WITH ENGCON TILT ROTATOR, INCLUDES DIGGING, TRENCHING, AND CLEAN UP BUCKET. 550 HOURS
  • 2022
  • Hyundai Construction Equipment
  • Crawler Excavators
  • HX140A L
  • Crawler
  • Cummins F3.8
  • J1995 (gross): 134 HP (100 kW) / 2,200 rpm | J1349 (net): 131 HP (98 kW) / 2,200 rpm
  • Tier 4F/ Stage V Emission Certified, 4 cylinder diesel engine with No Manual Regeneration.
  • Peak: 406 lb·ft (550 N·m) at 1,500 rpm
  • 4 cylinder
  • 134 HP (100 kW) / 2,200 rpm
  • 229 cu in (3.8 l)
  • Parking Brake Multi wet disc | Swing brake: Multi wet disc
  • Max. drawbar pull: 27,930 lbf (12,670 kgf) | Gradeability: 35° (70%)
  • Swing: 11.4 rpm | Max. travel: 2.0 mph (3.2 km/hr) / 3.4 mph (5.5 km/hr)
  • Operator sound pressure level (ISO 6396:2008): 71 dB(A) | Exterior sound power level (ISO 6395:2008): 99 dB(A)
  • Variable displacement tandem axis piston pumps | Plot pump: Fixed displacement gear pump single stage | Motors: Travel Variable displacement axial piston motor / Swing Two fixed displacement axial piston motor
  • 2 x 32.6 U.S. gpm (2 × 123.5 l/min) | Max flow plot pump: 7.5 U.S. gpm (28.5 l/min)
  • 2 Way Flow: 13~69 gpm (50~260 lpm) / Pressure: 1,450~5,076 psi (100~350 bar) | Rotating Flow: 11 gpm (39.9 lpm) | Pressure: 2,321 psi (160 bar)
  • Implement Circuits: 350 kgf/cm2 (4,980 psi) | Travel: 350 kgf/cm2 (4,980 psi) | Power Boost (Boom, Arm, Bucket): 380 kgf/cm2 (5,410 psi) | Swing Circuit: 280 kgf/cm2 (3,990 psi) | Pilot Circuit: 40 kgf/cm2 (569 psi)
  • Tumbler Distance: 9' 10" (3,000 mm) | Tail swing radius: 7' 8" (2,345 mm) | Track gauge: 6' 6" (1,990 mm)
  • Of counterbalance: 3' 1" (930 mm) | Min: 1' 5" (430 mm)
  • 25' 8" (7,830 mm) / 25' 9" (7,855 mm) / 25' 8" (7,830 mm) / 25' 7" (7,795 mm) | W/Doozer: 26' 9" (8,165 mm) / 26' 10" (8,190 mm) / 26' 9" (8,165 mm) | of Crawler: 12' 2" (3,696 mm)
  • 8' 2" (2,490 mm) / 8' 6" (2,590 mm) / 8' 10" (2,690 mm) | of Upper Structure: 8' 1" (2,475 mm)
  • of Cab: 9' 5" (2,860 mm) | of Guardrail: 10' 2" (3,110 mm) | of Boom: 8' 9" (2,675 mm) / 9' 3" (2,820 mm) / 9' 2" (2,800 mm)
  • Shoe: 20" (500 mm) / 24" (600 mm) / 28" (700 mm)
  • Rear-end: 7' 8" (2,335 mm) | Boom: 15' 1" (4,600 mm) | Arm: 6' 3" (1,900 mm) / 6' 11" (2,100 mm) / 8' 2" (2,500 mm) / 9' 10" (3,000 mm)
  • tank: 71.3 US gal (270 l)
  • engine: 5.5 US gal (21 l)
  • engine: 3.2 US gal (12 l)
  • (each): 0.6 US gal (2.3 l)
  • (Including tank): 55.5 US gal (210 l) | Tank: 31.7 US gal (120 l)
  • Drive Method: Fully hydrostatic type | Drive Motor: Axial piston motor, in-shoe design | Reduction System: Planetary reduction gear | Swing motor: Two fixed displacement axial piston motor | Swing reduction: 2-stage planetary | Swing bearing lubrication: Grease-bathed
  • Triple Grouser 500 (20") HX130A LCR: 31,310 lbs (14,200 kg) - 6.23 Psi (0.44 kgf/cm2) | 600 (24") HX130A LCR: 33,100 lbs (15,015 kg) - 6.59 Psi (0.46 kgf/cm2) | 700 (28") HX130A LCR: 32,240 lbs (14,625 kg) - 4.58 Psi (0.32 kgf/cm2)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $171,000.00
  • Concord
  • Pre-Owned
  • E034334
  • 2022
  • Hyundai Construction Equipment
  • Crawler Excavators HX140A L
  • HHKHE433AE0000347
  • Available

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.